CTC-1200 Four portable calibration 300°C to 1200°C
- Model : CTC-1200
- Working range : 300 °C to 1200 °C
- Resolution : 1 °C
- Accuracy : ± 2 °C
- Stability : ± 0.5 °C
- Stabilization time : 15 minutes
- Temperature display : °C / °F switchable
- Well diameter : 26 mm
- Immersion depth : 105 mm
- Heating time (ambient to max.) : Approximately 60 minutes
- Cooling time : Approximately 45 minutes (with forced air cooling)
- Pressostat test : Suitable
- Thermowell diameter : 8 mm
- Power supply / consumption : 230V AC, 50 Hz / 115V AC, 60 Hz - 700 W - switchable
- Instrument dimensions (L x W x H) : 160 x 365 x 450 mm
- Instrument weight : 15 Kg
Measurement capacity :
- Thermocouples : ISA Types J, K, R, S, N
- RTD : Pt100 IEC Std.
- mA : 0 to 25 mA
- mV : 0 to 100 / 1000 mV
- Volt : 0 to 10 V
- Resistance : 0 to 500Ω / 3.5 KΩ
-
Garanties sécurité
-
Politique de livraison
-
Politique retours
The portable calibration furnace from the CTC-1200 series is designed to quickly and efficiently verify your temperature instruments (thermometers, thermocouples, PT100, etc.), greatly simplifying your calibration operations.
It is compact and easily transportable for use in laboratories or on-site. It features a stable heat source and an intelligent cooling system to ensure the upper parts of your instruments remain at an appropriate temperature.
User-friendly, the CTC-1200 temperature calibrator operates with temperature-controlled metal blocks and interchangeable inserts. Equipped with a 5-inch LCD display and an intuitive multifunctional keypad, it allows you to work comfortably. Probes of various diameters can be used with the furnace thanks to thermowells of different sizes.
CTC-1200
Download
Reviews
No customer reviews for the moment.
16 other products in the same category:
|
* Output: 4 to 20mA * Supply voltage: 7.5 to 45VDC * Input: RTD, TC, Ohm, mV * Cold junction: Internal * Galvanic isolation: 2KVAC(In/Out) * Influence of ambient: Negligible * Load influence: Negligible * Power supply influence: Negligible * Resolution: 0.3uA * Installation: sensor head Form B * Operation: PC-programmable * Weight: approx. 35g * Dimensions: 44mm×24mm(Φ×H) |
- Storage temperature ; Atmospheric temperature
- Operating ambient temperature : -20°C to +60° C
- Media Temp : for rubber diaphragms 80 degree C max, higher with metal diaphragms
- Can be offered for higher temperatures with other capsule combinaisons
- Setpoint repeatability : ± 1% of FSR
- Enclosure : Die cast aluminium to IP 66
- Switch output : SPDT, DPDT, hermetically sealed, gold plated contacts
- Process connection : 1/4 "BSP standard, other options like flanges, triclover clamps, diaphragm seals available
- Storage temperature ; Atmospheric temperature
- Operating ambient temperature : -20°C to +60° C
- Media Temp : for rubber diaphragms 80 degree C max, higher with metal diaphragms
- Can be offered for higher temperatures with other capsule combinaisons
- Setpoint repeatability : ± 1% of FSR
- Enclosure : Die cast aluminium to IP 66
- Switch output : SPDT, DPDT, hermetically sealed, gold plated contacts
- Process connection : 1/4 "BSP standard, other options like flanges, triclover clamps, diaphragm seals available
- Universally progammable with HART-protocol for various input signals
- Two-wire technology, analogue output 4 to 20mA
- Highly accurate in entire operating temperature range
- Wide voltage supply range
- Customer specific measurement range settings
- Simple and user friendly software
- Multiparametric backlight rotatable LCD display
- Storage temperature ; Atmospheric temperature
- Operating ambient temperature : -20°C to +60° C
- Media Temp : for rubber diaphragms 80 degree C max, higher with metal diaphragms
- Can be offered for higher temperatures with other capsule combinaisons
- Setpoint repeatability : ± 1% of FSR
- Enclosure : Die cast aluminium to IP 66
- Switch output : SPDT, DPDT, hermetically sealed, gold plated contacts
- Process connection : 1/4 "BSP standard, other options like flanges, triclover clamps, diaphragm seals available
CN-BT (Low Temperature):
- Temperature Range: Ambient Temp. +10 °C to 350 °C
- Accuracy: Less than 0.5% F.S. (Min. 1 °C)
- Stability: ± 0.5 °C
- Resolution: 0.1 °C
- Emissivity: 0.98
- Aperture Diameter: 25 mm
- Time to Reach Max Temperature: 45 minutes
- Stabilization Time: 20 minutes (above 75 °C)
- Dimensions (L x W x H) / Weight: 485 x 430 x 190 mm / 11 kg
- Calibration Certification: Factory with ISO17025 traceability included
- Output: 4 to 20mA
- Supply voltage: 7.5 to 45VDC
- Input: RTD, TC, Ohm, mV
- Cold junction: Internal
- Influence of ambient: Negligible
- Load influence: Negligible
- Power supply influence: Negligible
- Resolution: 0.3uA
- Installation: sensor head Form B
- Operation: PC-programmable
- Model : CTC-1200
- Working range : 300 °C to 1200 °C
- Resolution : 1 °C
- Accuracy : ± 2 °C
- Stability : ± 0.5 °C
- Stabilization time : 15 minutes
- Temperature display : °C / °F switchable
- Well diameter : 26 mm
- Immersion depth : 105 mm
- Heating time (ambient to max.) : Approximately 60 minutes
- Cooling time : Approximately 45 minutes (with forced air cooling)
- Pressostat test : Suitable
- Thermowell diameter : 8 mm
- Power supply / consumption : 230V AC, 50 Hz / 115V AC, 60 Hz - 700 W - switchable
- Instrument dimensions (L x W x H) : 160 x 365 x 450 mm
- Instrument weight : 15 Kg
Measurement capacity :
- Thermocouples : ISA Types J, K, R, S, N
- RTD : Pt100 IEC Std.
- mA : 0 to 25 mA
- mV : 0 to 100 / 1000 mV
- Volt : 0 to 10 V
- Resistance : 0 to 500Ω / 3.5 KΩ