• Output: 4 to 20mA
• Supply voltage:  7.5 to 45VDC
• Input:  RTD, TC, Ohm, mV
• Cold junction:  Internal
• Influence of ambient:  Negligible
• Load influence: Negligible
• Power supply influence:  Negligible
• Resolution:  0.3uA
• Installation:  sensor head Form B
• Operation:  PC-programmable

*Output: 4 to 20mA

*Supply voltage: 7.5 to 45VDC

*Input: RTD, TC, Ohm, mV

*Accuracy(Pt100): <0.2K or 0.08%

*Cold junction: Internal

*Galvanic isolation: 2 KVAC(In/Out)

*Influence of ambient: Negligible

*Load influence: Negligible

*Power supply influence: Negligible

*Resolution: 0.3uA

*Operation: HART-protocol

*Installation: sensor head Form B

*Dimensions: 44mm×24mm(Φ×H)

*Weight: approx. 35g

• Dimensions: 44mm×22.5mm(Φ×H)
• Output: 4 to 20mA
• Supply voltage: 8 to 35VDC (non-Ex-Area)
•                              8 to 30VDC (Ex-Area)
• Input: PT100
• Installation: sensor head Form B

• * Galvanic isolation
• * No external power supply for configuration
• * Write or read the configuration off-line by just connecting a PC
• * Fault signal on sensor break or short circuit
• * 2 wire technology, 4 to 20mA analogue output
• * High accuracy in total ambient temperature range
• * Customer specific measurement range setting or expanded SETUP

• * Dimensions:   44mm×22.5mm(Φ×H)
• * Output:   4 to 20mA
• * Supply voltage:   11.5 to 35VDC (non-Ex-Area) 11.5 to 30VDC (Ex-Area)
• * Input:   RTD, TC, Ohm, mV
• * Operation:   HART-protocol
• * Galvanic isolation(In/Out):  2KVAC
• * Installation:  sensor head Form B

• Easy to read Color Graphical TFT LCD display
• Rechargeable lithium ion battery with enhanced power control for prolonged battery life
• Measure or Source: mA, mV and V readings
• 24 VDC Loop power Supply to power transmitters and loops
• 2W simulate and Read/ Power mode for in-situ Loop checking and calibration
• Step/ Ramp functions with Auto/ Man selection
• Universal Serial Bus (USB) communication port for charging, data retrieve and firmware upgrade
• Data Logging to measure long time drift
• Other Features: Max/Min/Average, filter settings, tare facility, adjustable backlight, alarm annunciation (on display and buzzer), automatic Display off.

• Easy to read Color Graphical TFT LCD display
• Rechargeable lithium ion battery with enhanced power control for prolonged battery life
• Measure or Source: mA, mV and V readings
• 24 VDC Loop power Supply to power transmitters and loops
• 2W simulate and Read/ Power mode for in-situ Loop checking and calibration
• Step/ Ramp functions with Auto/ Man selection
• Universal Serial Bus (USB) communication port for charging, data retrieve and firmware upgrade
• Data Logging to measure long time drift
• Other Features: Max/Min/Average, filter settings, tare facility, adjustable backlight, alarm annunciation (on display and buzzer), automatic Display off.

• Direct Temperature output 12 Switched Steps
• < 0.3 °C Accuracy
• Quick Check Switch BOX
• Allows 2, 3 or 4 wire connections
• Compact Size

• Compact, handheld, User friendly menu
• Easy to read Color Graphical TFT LCD display
• Rechargeable lithium Ion battery with enhanced power control for prolonged battery life
• Measure: mA/ V/ mV/ mA (24V)/ Switch-test / RTD/ TC/ Frequency/ Pulse
• Source: mA/ V/ mV/ mA(2W)/ Resistance/ RTD/ TC/ Frequency/ Pulse
• 24 VDC Loop power Supply to power transmitters and loops
• Step/Ramp functions with Auto/Man selection
• Universal Serial Bus (USB) communication port for charging, data retrieve and firmware upgrade
• Data Logging to measure long time drift
• Other Features: Max/Min/Average, filter settings, tare facility, adjustable backlight, alarm annunciation (on display and buzzer), glance screen mode
• Continuity Test
• Pulsed RTD transmitter compatible
• HART loop resistor

• Integrated pneumatic pressure pump up to 70 bar
• Pressure module: any scale from -0.95 to 70 bar
• Accuracy: 0.01 % of full scale
• Temperature compensation up to 50 °C 
• High stability & accuracy 
• Simulates & measures electrical signals
• 4.3 " TFT colour touch screen
• 8 hours battery life
• USB PC interface & Calibration software 
• ISO17025 traceable calibration certificate