• Water and other clear liquids metering

• Non-intrusive measurement

• Energy metering possible as an option

• Size: DN15 to DN65

• No intervention on the pipeline

• Ultra-fast hot installation

• Pipe: PVC, carbon steel, stainless steel, copper

• Large 256*128 screen for optimal reading

• 4-20 mA output

• RS485 Modbus RTU communication

• Sleek & ultra-compact design

• IP65 aluminum alloy housing

• Excellent price-performance ratio

Applications :

• Compressors
• R.O Plants

Specifications : 

• SS316 & Teflon as standard wetted parts
• Electrical Rating : 5A, 250VAC;0.2A,250VDC(res)
• Pressure port : 1/4" BSPM

CN-DT (Duo – Dual Cavities):

• Cavity 1: +50 °C to 300 °C
• Cavity 2: +250 °C to 600 °C
• Accuracy: Less than 0.5% F.S. (Cavity 1 Min. 1 °C / Cavity 2 Min. 2 °C)
• Stability: ± 0.5 °C
• Resolution: 1 °C
• Emissivity: 0.98
• Aperture Diameter: 25 mm
• Time to Reach Max Temperature: 45 minutes
• Stabilization Time: 30 minutes (above 75 °C)
• Dimensions (L x W x H) / Weight: 450 x 410 x 190 mm / 14 kg
• Calibration Certification: Factory with ISO17025 traceability included

• Storage temperature ; Atmospheric temperature
• Operating ambient temperature : -20°C to +60° C
• Media Temp : for rubber diaphragms 80 degree C max, higher with metal diaphragms
• Can be offered for higher temperatures with other capsule combinaisons
• Setpoint repeatability : ± 1% of FSR
• Enclosure : Die cast aluminium to IP 66
• Switch output : SPDT, DPDT, hermetically sealed, gold plated contacts
• Process connection : 1/4 "BSP standard, other options like flanges, triclover clamps, diaphragm seals available

• Storage temperature ; Atmospheric temperature
• Operating ambient temperature : -20°C to +60° C
• Media Temp : for rubber diaphragms 80 degree C max, higher with metal diaphragms
• Can be offered for higher temperatures with other capsule combinaisons
• Setpoint repeatability : ± 1% of FSR
• Enclosure : Die cast aluminium to IP 66
• Switch output : SPDT, DPDT, hermetically sealed, gold plated contacts
• Process connection : 1/4 "BSP standard, other options like flanges, triclover clamps, diaphragm seals available

• * Galvanic isolation
• * No external power supply for configuration
• * Write or read the configuration off-line by just connecting a PC
• * Fault signal on sensor break or short circuit
• * 2 wire technology, 4 to 20mA analogue output
• * High accuracy in total ambient temperature range
• * Customer specific measurement range setting or expanded SETUP

• Model : CTC-1200
• Working range : 300 °C to 1200 °C
• Resolution : 1 °C
• Accuracy : ± 2 °C
• Stability : ± 0.5 °C
• Stabilization time : 15 minutes
• Temperature display : °C / °F switchable
• Well diameter : 26 mm
• Immersion depth : 105 mm
• Heating time (ambient to max.) : Approximately 60 minutes
• Cooling time : Approximately 45 minutes (with forced air cooling)
• Pressostat test : Suitable
• Thermowell diameter : 8 mm
• Power supply / consumption : 230V AC, 50 Hz / 115V AC, 60 Hz - 700 W - switchable
• Instrument dimensions (L x W x H) : 160 x 365 x 450 mm
• Instrument weight : 15 Kg

Measurement capacity :

• Thermocouples : ISA Types J, K, R, S, N
• RTD : Pt100 IEC Std.
• mA : 0 to 25 mA
• mV : 0 to 100 / 1000 mV
• Volt : 0 to 10 V
• Resistance : 0 to 500Ω / 3.5 KΩ

• Input: RTD
• Type:pt100
• Accuracy:0.2K or 0.1% of spanPerformance characteristics
• Response time: 1s
• Reference condition : Calibration temperature:+23°C(73.4K)±5K
• Long term stability:≤0.05%year
• Switch on delay:≤5s
• Influence of ambient: Negligible
• Load influence: Negligible
• Power supply influence:Negligible
• Resolution:1μA·Storage temperature
• Ambient temperature limits:40 to +85 °C (-40 to 185 °F)
• Storage temperature: -40 to +100 °C (-40 to 212 °F)
• Condensation: Allowable
• Degree of protection:IP00/IP66 installed
• Shock and vibration resistance:4g/2 to150 Hz as per IEC 60 068-26
• Electromagnetic compatibility (EMC) : Interference immunity and interference emission 
• GB/T17626.2-1998), compliance with IEC 61000-4-3:1995

• * Dimensions:   44mm×22.5mm(Φ×H)
• * Output:   4 to 20mA
• * Supply voltage:   11.5 to 35VDC (non-Ex-Area) 11.5 to 30VDC (Ex-Area)
• * Input:   RTD, TC, Ohm, mV
• * Operation:   HART-protocol
• * Galvanic isolation(In/Out):  2KVAC
• * Installation:  sensor head Form B