- Pressure: Absolute
- Details: 0.2% of full scale
- 11 Units: Pa, kPa, MPa, PSI, Kg / cm², Bar, mmBar, cmH20 ...
- Display: Large LCD screen 5 or 6 Digit & Bargraph in%
- 7 function keys
- Temperature compensation from 0 to 50 ° C
- 60 hour rechargeable lithium battery
- Integrated data logger
- Clean design & high performance
- CE & Exia II CT4Ga approved
- Calibration certificate with factory traceability
- Universal settings with HART-protocol for various input signals
- 2 wire technology, 4 to 20mA analogue output
- High accuracy in total ambient temperature range
- Galvanic isolation
- An internal temperature sensor of active temperature compensation
- Wide voltage supply range
- Customer specific measurement range settings
- Simple and user friendly software
- Multiparametric backlight rotatable LCD display
- Pressure: Absolute
- Details: 0.1% of full scale
- 11 Units: Pa, kPa, MPa, PSI, Kg / cm², Bar, mmBar, cmH20 ...
- Display: Large LCD screen 5 or 6 Digit & Bargraph in%
- 7 function keys
- Temperature compensation from 0 to 50 ° C
- 60 hour rechargeable lithium battery
- Integrated data logger
- Clean design & high performance
- CE & Exia II CT4Ga approved
- Calibration certificate with factory traceability
- Universally progammable with HART-protocol for various input signals
- Two-wire technology, analogue output 4 to 20mA
- Highly accurate in entire operating temperature range
- Wide voltage supply range
- Customer specific measurement range settings
- Simple and user friendly software
- Multiparametric backlight rotatable LCD display
- Pressure: Differential
- Details: 0.05% of full scale
- 11 Units: Pa, kPa, MPa, PSI, Kg / cm², Bar, mmBar, cmH20 ...
- Display: Large LCD screen 5 or 6 Digit & Bargraph in%
- 7 function keys
- Temperature compensation from 0 to 50 ° C
- 60 hour rechargeable lithium battery
- Integrated data logger
- Clean design & high performance
- CE & Exia II CT4Ga approved
- Calibration certificate with factory traceability
- Input: RTD
- Type:pt100
- Accuracy:0.2K or 0.1% of spanPerformance characteristics
- Response time: 1s
- Reference condition : Calibration temperature:+23°C(73.4K)±5K
- Long term stability:≤0.05%year
- Switch on delay:≤5s
- Influence of ambient: Negligible
- Load influence: Negligible
- Power supply influence:Negligible
- Resolution:1μA·Storage temperature
- Ambient temperature limits:40 to +85 °C (-40 to 185 °F)
- Storage temperature: -40 to +100 °C (-40 to 212 °F)
- Condensation: Allowable
- Degree of protection:IP00/IP66 installed
- Shock and vibration resistance:4g/2 to150 Hz as per IEC 60 068-26
- Electromagnetic compatibility (EMC) : Interference immunity and interference emission
- GB/T17626.2-1998), compliance with IEC 61000-4-3:1995
- Pressure range: -0.4 to 0.4 bar
- Media: Air
- Resolution: 0.001 mbar - 0.1 Pa
- Material: Body: Stainless steel & aluminum ~ Fittings: Stainless steel ~ Gaskets: Buna-N
- Instrument connections: 1 / 4NPT F, 1 / 4BSP F, or M20X1.5 F
- Dimensions: Base: 240 × 130 ~ Height × 130 (mm) 1.5 kg
- Ease of use, robust design and reliable performance
- Output: 4 to 20mA
- Supply voltage: 7.5 to 45VDC
- Input: RTD, TC, Ohm, mV
- Cold junction: Internal
- Influence of ambient: Negligible
- Load influence: Negligible
- Power supply influence: Negligible
- Resolution: 0.3uA
- Installation: sensor head Form B
- Operation: PC-programmable
- Pressure range: 95% of vacuum to 25 bar
- Media: Air
- Resolution: 1 mbar
- Material: Body: Stainless steel & aluminum ~ Fittings: Stainless steel ~ Gaskets: Buna-N
- Instrument connections: 1 / 4NPT F, 1 / 4BSP F, or M20X1.5 F
- Dimensions: Base: 280 × 170 ~ Height × 140 (mm) 2.4 kg
- Ease of use, robust design and reliable performance
* Output: 4 to 20mA * Supply voltage: 7.5 to 45VDC * Input: RTD, TC, Ohm, mV * Cold junction: Internal * Galvanic isolation: 2KVAC(In/Out) * Influence of ambient: Negligible * Load influence: Negligible * Power supply influence: Negligible * Resolution: 0.3uA * Installation: sensor head Form B * Operation: PC-programmable * Weight: approx. 35g * Dimensions: 44mm×24mm(Φ×H) |
- Pressure range : 95% of vacuum up to 100 bar
- Media : Air
- Adjustment resolution: 10 mbar
- Material : Body: SS & aluminum ~ Ram/adapters: SS ~ Seals: Buna-N
- Connections: 1/2 NPT F, 1/2 BSP F, or M20X1.5 F
- Dimensions: Base : 500 ×325 ~ Height ×135 (mm) 6.4 kg
- User-friendly, robust design and reliable performance
*Output: 4 to 20mA
*Supply voltage: 7.5 to 45VDC
*Input: RTD, TC, Ohm, mV
*Accuracy(Pt100): <0.2K or 0.08%
*Cold junction: Internal
*Galvanic isolation: 2 KVAC(In/Out)
*Influence of ambient: Negligible
*Load influence: Negligible
*Power supply influence: Negligible
*Resolution: 0.3uA
*Operation: HART-protocol
*Installation: sensor head Form B
*Dimensions: 44mm×24mm(Φ×H)
*Weight: approx. 35g