• Input: RTD
• Type:pt100
• Accuracy:0.2K or 0.1% of spanPerformance characteristics
• Response time: 1s
• Reference condition : Calibration temperature:+23°C(73.4K)±5K
• Long term stability:≤0.05%year
• Switch on delay:≤5s
• Influence of ambient: Negligible
• Load influence: Negligible
• Power supply influence:Negligible
• Resolution:1μA·Storage temperature
• Ambient temperature limits:40 to +85 °C (-40 to 185 °F)
• Storage temperature: -40 to +100 °C (-40 to 212 °F)
• Condensation: Allowable
• Degree of protection:IP00/IP66 installed
• Shock and vibration resistance:4g/2 to150 Hz as per IEC 60 068-26
• Electromagnetic compatibility (EMC) : Interference immunity and interference emission 
• GB/T17626.2-1998), compliance with IEC 61000-4-3:1995

• Output: 4 to 20mA
• Supply voltage:  7.5 to 45VDC
• Input:  RTD, TC, Ohm, mV
• Cold junction:  Internal
• Influence of ambient:  Negligible
• Load influence: Negligible
• Power supply influence:  Negligible
• Resolution:  0.3uA
• Installation:  sensor head Form B
• Operation:  PC-programmable

*Output: 4 to 20mA

*Supply voltage: 7.5 to 45VDC

*Input: RTD, TC, Ohm, mV

*Accuracy(Pt100): <0.2K or 0.08%

*Cold junction: Internal

*Galvanic isolation: 2 KVAC(In/Out)

*Influence of ambient: Negligible

*Load influence: Negligible

*Power supply influence: Negligible

*Resolution: 0.3uA

*Operation: HART-protocol

*Installation: sensor head Form B

*Dimensions: 44mm×24mm(Φ×H)

*Weight: approx. 35g

• Dimensions: 44mm×22.5mm(Φ×H)
• Output: 4 to 20mA
• Supply voltage: 8 to 35VDC (non-Ex-Area)
•                              8 to 30VDC (Ex-Area)
• Input: PT100
• Installation: sensor head Form B

• * Galvanic isolation
• * No external power supply for configuration
• * Write or read the configuration off-line by just connecting a PC
• * Fault signal on sensor break or short circuit
• * 2 wire technology, 4 to 20mA analogue output
• * High accuracy in total ambient temperature range
• * Customer specific measurement range setting or expanded SETUP

• * Dimensions:   44mm×22.5mm(Φ×H)
• * Output:   4 to 20mA
• * Supply voltage:   11.5 to 35VDC (non-Ex-Area) 11.5 to 30VDC (Ex-Area)
• * Input:   RTD, TC, Ohm, mV
• * Operation:   HART-protocol
• * Galvanic isolation(In/Out):  2KVAC
• * Installation:  sensor head Form B

• Precision: ± 0.5%, or ± 0.25%, of full scale
• Units: Bar MPa, PSI
• Relative pressure: -1 bar up to 2000 bar
• Differential pressure: 60 mbar up to 25 bar
• Switch: relay signal adjustable over the whole scale
• Display: Large red 4 DIGIT LED screen
• Keys: On / Off, ZERO, UNIT, SET
• Connection: 1/4 ’’ NPT, 1/4 ’’ BSP, 1/4 ’’ G (or customizable)
• Dial size: 80 mm
• All stainless steel fitting and housing
• 220VAC or 24VDC power supply
• CE & Ex ExibII BT4 certificate
• Factory calibration certificate optional
• ISO17025 calibration certificate optional

• Measuring range: 200Pa-40MPa
• Output signal: 4-20mA, 4 ~ 20mA / HART, client
• Reference accuracy: ± 0.075% URL, optional ± 0.05% URL
• Fluid temperature: -40-120
• Measuring fluid: level, density and pressure of the liquid, gas or vapor
• Protection class: IP67
• Diaphragm material: SUS316L, Hastelloy C
• Stability: ± 0.2% URL / 60 months
• Process connection: M20 * 1.5 (M), 1 / 2-14NPT (F), 1 / 4-18NPT (F)
• Approvals: ATEX, IECEx, NEPSI, RoHS, CE

• Measuring range: 10kPa-1MPa
• Output signal: 4-20mA, 4-20mA + HART ...
• Accuracy: ± 0.1% URL, ± 0.075% URL
• Substrate temperature: -40-120 ° C
• Measurement: pressure, level, differential pressure, density, flow
• Protection class: IP67
• Diaphragm material: SUS316L, Hastelloy C ...
• Stability: ± 0.2% of URL / 5 years
• Process connection: DN50 PN10, DN80 PN10, DN100 PN10
• Certificates: CE, EX- test certificate

• Measuring range: 4kPa-1MPa
• Output signal: 4-20mA, 4-20mA + HART ...
• Accuracy: ± 0.2% URL, ± 0.5% URL
• Substrate temperature: -40 to 120 ° C
• Measurement: pressure, level, differential pressure, density, flow
• Protection class: IP67
• Diaphragm material: SUS316L, Hastelloy C
• Stability: ± 0.2% of URL / 5 years
• Process connection: DN50 PN10, DN80 PN10, DN100 PN10, Tri-Clamp 1-1 / 2 ", Tri-Clamp 2"
• Approvals: CE certificate, EX-proof

• Measuring range: 200Pa-10MPa
• Output signal: 4-20mA, 4 ~ 20mA / HART, client
• Reference accuracy: ± 0.075% URL, optional ± 0.05% URL
• Operating temperature: -40-85, LCD display: -40-120 ℃
• Fluid temperature: -40-120
• Measuring fluid: level, density and pressure of the liquid, gas or vapor
• Protection class: IP67
• Diaphragm material: SUS316L, Hastelloy C
• Stability: ± 0.2% URL / 60 months
• Process connection: M20 * 1.5 (M), 1 / 2-14NPT (F), 1 / 4-18NPT (F)
• Approvals: ATEX, IECEx, NEPSI, RoHS, CE