• * Dimensions:   44mm×22.5mm(Φ×H)
• * Output:   4 to 20mA
• * Supply voltage:   11.5 to 35VDC (non-Ex-Area) 11.5 to 30VDC (Ex-Area)
• * Input:   RTD, TC, Ohm, mV
• * Operation:   HART-protocol
• * Galvanic isolation(In/Out):  2KVAC
• * Installation:  sensor head Form B

• * Galvanic isolation
• * No external power supply for configuration
• * Write or read the configuration off-line by just connecting a PC
• * Fault signal on sensor break or short circuit
• * 2 wire technology, 4 to 20mA analogue output
• * High accuracy in total ambient temperature range
• * Customer specific measurement range setting or expanded SETUP

• Dimensions: 44mm×22.5mm(Φ×H)
• Output: 4 to 20mA
• Supply voltage: 8 to 35VDC (non-Ex-Area)
•                              8 to 30VDC (Ex-Area)
• Input: PT100
• Installation: sensor head Form B

*Output: 4 to 20mA

*Supply voltage: 7.5 to 45VDC

*Input: RTD, TC, Ohm, mV

*Accuracy(Pt100): <0.2K or 0.08%

*Cold junction: Internal

*Galvanic isolation: 2 KVAC(In/Out)

*Influence of ambient: Negligible

*Load influence: Negligible

*Power supply influence: Negligible

*Resolution: 0.3uA

*Operation: HART-protocol

*Installation: sensor head Form B

*Dimensions: 44mm×24mm(Φ×H)

*Weight: approx. 35g

• Output: 4 to 20mA
• Supply voltage:  7.5 to 45VDC
• Input:  RTD, TC, Ohm, mV
• Cold junction:  Internal
• Influence of ambient:  Negligible
• Load influence: Negligible
• Power supply influence:  Negligible
• Resolution:  0.3uA
• Installation:  sensor head Form B
• Operation:  PC-programmable

• Input: RTD
• Type:pt100
• Accuracy:0.2K or 0.1% of spanPerformance characteristics
• Response time: 1s
• Reference condition : Calibration temperature:+23°C(73.4K)±5K
• Long term stability:≤0.05%year
• Switch on delay:≤5s
• Influence of ambient: Negligible
• Load influence: Negligible
• Power supply influence:Negligible
• Resolution:1μA·Storage temperature
• Ambient temperature limits:40 to +85 °C (-40 to 185 °F)
• Storage temperature: -40 to +100 °C (-40 to 212 °F)
• Condensation: Allowable
• Degree of protection:IP00/IP66 installed
• Shock and vibration resistance:4g/2 to150 Hz as per IEC 60 068-26
• Electromagnetic compatibility (EMC) : Interference immunity and interference emission 
• GB/T17626.2-1998), compliance with IEC 61000-4-3:1995

• Universally progammable with HART-protocol for various input signals
• Two-wire technology, analogue output 4 to 20mA
• Highly accurate in entire operating temperature range
• Wide voltage supply range
• Customer specific measurement range settings
• Simple and user friendly software
• Multiparametric backlight rotatable LCD display

• Universal settings with HART-protocol for various input signals
• 2 wire technology, 4 to 20mA analogue output
• High accuracy in total ambient temperature range
• Galvanic isolation
• An internal temperature sensor of active temperature compensation
• Wide voltage supply range
• Customer specific measurement range settings
• Simple and user friendly software
• Multiparametric backlight rotatable LCD display

• Communication : e-HART
• Output : 4 to 20mA
• Supply voltage : 7.5 to 45VDC
• Input : RTC, TC, Ohm, mV
• Cold junction : Internal 
• Accuracy (Pt100) : <0,2K or 0,08%
• Influence of ambient : Negligible 
• Load influence : Negligible
• Power supply influence : Negligible 
• Resolution : 0.3uA
• Galvanic isolation (In/Out) : 2KVAC
• Installation : DIN Rail 

• Communication : e-HART
• Output : 4 to 20mA
• Supply voltage : 7.5 to 45VDC
• Input : RTC, TC, Ohm, mV
• Cold junction : Internal 
• Accuracy (Pt100) : <0,2K or 0,08%
• Influence of ambient : Negligible 
• Load influence : Negligible
• Power supply influence : Negligible 
• Resolution : 0.3uA
• Galvanic isolation (In/Out) : 2KVAC
• Installation : DIN Rail 

• Communication : e-HART
• Output : 4 to 20mA
• Supply voltage : 7.5 to 45VDC
• Input : RTC, TC, Ohm, mV
• Cold junction : Internal 
• Accuracy (Pt100) : <0,2K or 0,08%
• Influence of ambient : Negligible 
• Load influence : Negligible
• Power supply influence : Negligible 
• Resolution : 0.3uA
• Installation : DIN Rail 

• Non-contact level measurement of liquids
• Applicable for continuous level measurement of liquids
  extremely aggressiveness in storage containers, reactors or process vessels.
• Measuring ranges : 0 ~ 30m
• Accuracy : ± 2mm
• Process pressure : -1 bar ~ 16 bar
• Process temperature : -40℃ ~ +200℃
• Media-conracting materials :
  Process fittings: 316L
  Antenna: PTFE, PFA, PP
  Seal: FKM, EPDM, KALREZ
• Display and Adjustment LCD display, tank side display and tank side hub
• Communications : HART, RS485 Modbus, 4-20 mA...
• Protect Level : IP67
• Ex information : EX ia IIC T6 Ga Ex d ia [iaGa] IIC T6/T2 Gb Ex iaD tD A21 IP67T80ºC/T290ºC
• Different Models depending on the application

• Non-contact level measurement of liquids
• Applicable for continuous level measurement of liquids aggressive liquids
  with lower demands on pressure and temperature ranges.
• Measuring ranges : 0 ~ 30m
• Accuracy : ± 2mm
• Process pressure : -1 bar ~ 2 bar
• Process temperature : -40℃ ~ +130℃
• Media-conracting materials :
  Process fittings: PP
  Antenna: PP
  Seal: PP PTFE
• Display and Adjustment LCD display, tank side display and tank side hub
• Communications : HART, RS485 Modbus, 4-20 mA...
• Protect Level : IP67
• Ex information : EX ia IIC T6 Ga Ex d ia [iaGa] IIC T6/T2 Gb
• Different Models depending on the application

• Non-contact level measurement of liquids
• Continuous level measurement of aggressive liquids
  (storage containers, reactors or process vessels...)
• Measuring ranges : 0 ~ 20m or 0 ~ 30m
• Accuracy : ± 2mm
• Process pressure : -1 bar ~ 2 bar
• Process temperature : -40℃ ~ +200℃
• Media-conracting materials :
  Process fittings: PP
  Antenna: PP
  Seal: FKM, EPDM, KALREZ
• Display and Adjustment LCD display, tank side display and tank side hub
• Communications : HART, RS485 Modbus, 4-20 mA...
• Protect Level : IP67
• Ex information : EX ia IIC T6 Ga Ex d ia [iaGa] IIC T6/T2 Gb
• Different Models depending on the application