Active filters
-
Categories:
Calibration
-
Categories:
Metering
-
Categories:
Pressure
-
Categories:
Temperature
-
Weight:
0 kg - 1 kg
PI858-TSD-D Differential pressure transmitter and membrane...
- Measuring range: 4kPa-1MPa
- Output signal: 4-20mA, 4-20mA + HART ...
- Accuracy: ± 0.2% URL, ± 0.5% URL
- Substrate temperature: -40 to 120 ° C
- Measurement: pressure, level, differential pressure, density, flow
- Protection class: IP67
- Diaphragm material: SUS316L, Hastelloy C
- Stability: ± 0.2% of URL / 5 years
- Process connection: DN50 PN10, DN80 PN10, DN100 PN10, Tri-Clamp 1-1 / 2 ", Tri-Clamp 2"
- Approvals: CE certificate, EX-proof
Temperature and humidity transmitter HT7S
- Rugged weather proof enclosure with Exproof enclosure as an option
- Available in Wall and Duct mounting versions.
- Three variants.
- Measuring Range: 0-100% RH in models, suitable formmany applications
- Class-A RTD Pt 100 sensor used for temperature measurement
- Linearised analog 4-20mA signal output (2wire loop powered)
- Replaceable humidity sensor assembly
- Capacitance based sensing.
- High Accuracy
- Excellent long-term stability
PCAL-223 Digital calibrator
- Accuracy: ± 0.02%, ± 0.05%, ± 0.1% of full scale
- 10 Units: Pa, kPa, MPa, PSI, Kg / cm², Bar, mBar, cmH20, mmH20, mmHg
- Pressures: Relative, differential, Absolute
- Display: Large LCD screen 6 Digits double display & bargraph
- Connection: 1/4 ’’ NPT, 1/4 ’’ BSP, 1/4 ’’ G (or customizable)
- Measurement & simulation of electrical signals
- 10 function keys
- Temperature compensation from 0 to 50 ° C
- 60 hour rechargeable lithium battery
- HART function
- RS232 interface
- Integrated data logger
- Clean design & high performance
- CE & Exic II BT6Gc approved
- Calibration certificate with factory traceability
- ISO17025 certificate optional
TT7S10-D and TT7S10-XP loop powered temperature transmitters
- Universal input (RTD, Thermocouple, Ohm, mV)
- Available in below options :
TT7S10-D: Din Rail mount with 3″, 4 digit LED display
TT7S10-XP: Wall or 2″ Pipe mount Ex-proof Transmitter with touch sense keys
- 0.56″, 4 digit LED display in Single Compartment
- 0.39″, 4 digit LED display in Dual Compartment
- 1.5 KV RMS Isolation between Input & Output Linearized Output
- Highly Accurate
- Fully Programmable for Input type & Range
- Digital Filter
- Easy configuration using keys and display
- Windows mTRAN software for Configuration, Calibration & Monitoring
- Reverse Loop polarity protection
- Direct / Reverse output
- Sensor break detection
PI700X Digital precision pressure gauge 0.05% with Recorder
- Pressure: relative
- Details: 0.05% of full scale
- Connexion : 1/2" G (M)
- 11 Units: Pa, kPa, MPa, PSI, Kg / cm², Bar, mmBar, cmH20 ...
- Display: Large LCD screen 5 or 6 Digit & Bargraph in%
- 7 function keys
- Temperature compensation from 0 to 50 ° C
- 60 hour rechargeable lithium battery
- Integrated data logger
- Clean design & high performance
- CE & Exia II CT4Ga approved
- Calibration certificate with factory traceability
Temperature Transmitter TT7S
- Universal input (RTD, thermocouple, Ohm, mV)
- 1.5 KV RMS Isolation between Input & Output
- Linearized Output
- Highly Accurate
- Fully Programmable for Input type & Range
- Fast Response time: <500 ms
- Digital Filter
- Windows mTRAN software for Configuration, Calibration & Monitoring
- Reverse polarity protection
- Direct/Reverse output
- Sensor break detection
- Loop/Aux Powered models
PITMT130 - Temperature Transmitter
- Communication : e-HART
- Output : 4 to 20mA
- Supply voltage : 7.5 to 45VDC
- Input : RTC, TC, Ohm, mV
- Cold junction : Internal
- Accuracy (Pt100) : <0,2K or 0,08%
- Influence of ambient : Negligible
- Load influence : Negligible
- Power supply influence : Negligible
- Resolution : 0.3uA
- Installation : DIN Rail
PI700X Digital precision pressure gauge 0.2% with Recorder
- Pressure: Absolute
- Details: 0.2% of full scale
- 11 Units: Pa, kPa, MPa, PSI, Kg / cm², Bar, mmBar, cmH20 ...
- Display: Large LCD screen 5 or 6 Digit & Bargraph in%
- 7 function keys
- Temperature compensation from 0 to 50 ° C
- 60 hour rechargeable lithium battery
- Integrated data logger
- Clean design & high performance
- CE & Exia II CT4Ga approved
- Calibration certificate with factory traceability
PITMT131 - Temperature Transmitter
- Communication : e-HART
- Output : 4 to 20mA
- Supply voltage : 7.5 to 45VDC
- Input : RTC, TC, Ohm, mV
- Cold junction : Internal
- Accuracy (Pt100) : <0,2K or 0,08%
- Influence of ambient : Negligible
- Load influence : Negligible
- Power supply influence : Negligible
- Resolution : 0.3uA
- Galvanic isolation (In/Out) : 2KVAC
- Installation : DIN Rail
PI700X Digital precision pressure gauge 0.1% with Recorder
- Pressure: Absolute
- Details: 0.1% of full scale
- 11 Units: Pa, kPa, MPa, PSI, Kg / cm², Bar, mmBar, cmH20 ...
- Display: Large LCD screen 5 or 6 Digit & Bargraph in%
- 7 function keys
- Temperature compensation from 0 to 50 ° C
- 60 hour rechargeable lithium battery
- Integrated data logger
- Clean design & high performance
- CE & Exia II CT4Ga approved
- Calibration certificate with factory traceability
PITMT132 - Temperature Transmitter
- Communication : e-HART
- Output : 4 to 20mA
- Supply voltage : 7.5 to 45VDC
- Input : RTC, TC, Ohm, mV
- Cold junction : Internal
- Accuracy (Pt100) : <0,2K or 0,08%
- Influence of ambient : Negligible
- Load influence : Negligible
- Power supply influence : Negligible
- Resolution : 0.3uA
- Galvanic isolation (In/Out) : 2KVAC
- Installation : DIN Rail
PI700X Digital differential pressure gauge 0.05% with Recorder
- Pressure: Differential
- Details: 0.05% of full scale
- 11 Units: Pa, kPa, MPa, PSI, Kg / cm², Bar, mmBar, cmH20 ...
- Display: Large LCD screen 5 or 6 Digit & Bargraph in%
- 7 function keys
- Temperature compensation from 0 to 50 ° C
- 60 hour rechargeable lithium battery
- Integrated data logger
- Clean design & high performance
- CE & Exia II CT4Ga approved
- Calibration certificate with factory traceability
PITMT272 - Smart Temperature Transmitter HART
- Universal settings with HART-protocol for various input signals
- 2 wire technology, 4 to 20mA analogue output
- High accuracy in total ambient temperature range
- Galvanic isolation
- An internal temperature sensor of active temperature compensation
- Wide voltage supply range
- Customer specific measurement range settings
- Simple and user friendly software
- Multiparametric backlight rotatable LCD display
PI100 Digital pressure gauge ± 0,4 %
- Accuracy: ± 0.4% of full scaleUnits: kPa, Pa, PSI, Kg / cm², Bar, MPa
- Display: Large LCD screen with 5 DIGIT + Pressure graph
- Keys: On / Off, Reset, backlight
- Connection: 1/4 ’’ NPT, 1/4 ’’ G (or customizable)
- Dial size: 100 mm
- Max & min pressure recording
- Battery alarm function
- Ease of use, robust design and reliable performance
- Lithium battery 1 year autonomy in 24 hour operation
PITMT199 - Temperature Field Transmitter HART
- Universally progammable with HART-protocol for various input signals
- Two-wire technology, analogue output 4 to 20mA
- Highly accurate in entire operating temperature range
- Wide voltage supply range
- Customer specific measurement range settings
- Simple and user friendly software
- Multiparametric backlight rotatable LCD display
English
Français
