Active filters
-
Categories:
Automation
-
Categories:
Calibration
-
Categories:
LEVEL
-
Categories:
Temperature
PITMT181L - Temperature transmitter
- * Galvanic isolation
- * No external power supply for configuration
- * Write or read the configuration off-line by just connecting a PC
- * Fault signal on sensor break or short circuit
- * 2 wire technology, 4 to 20mA analogue output
- * High accuracy in total ambient temperature range
- * Customer specific measurement range setting or expanded SETUP
PMH-2500 - Hydraulic Pressure Test Pump 2500 bar
- Pressure range: 0 to 2500 bar
- Media: Mineral oil
- Resolution: 10 mbar ~ 1 kPa
- Material: Body: Stainless steel & aluminum ~ Fittings: Stainless steel ~ Gaskets: Buna-N
- Instrument connections: 3x 1/2 G F ports
- Dimensions: Base: 450 × 380 ~ Height × 250 mm
- Weight: 17 kg
- Ease of use, robust design and reliable performance
CR06 Universal 6 Way Paper Recorder
- 6 universal channels
- 0.2% accuracy
- Printing: 6 colors
- Dustproof, IP-65 waterproof
- RS-232 communication interface
- Universal entrance and range
- UL, CSA, CE compliance
- 144 (L) x144 (H) x150 (D) mm Weight 1.54 kg
- 1 pack of print sheet
- 1 ink ribbon
PITMT182L - Temperature transmitter
- * Dimensions: 44mm×22.5mm(Φ×H)
- * Output: 4 to 20mA
- * Supply voltage: 11.5 to 35VDC (non-Ex-Area) 11.5 to 30VDC (Ex-Area)
- * Input: RTD, TC, Ohm, mV
- * Operation: HART-protocol
- * Galvanic isolation(In/Out): 2KVAC
- * Installation: sensor head Form B
TNRP59 Liquid pulsed radar level transmitter
- Maximum measurement range: 15m
- Measurement accuracy: ± 10 mm
- Process temperature: (-40 ～ 80) ° C (-40 ～ 120) ° C (-40 ～ 250) ° C
- Process pressure: Normal, (-0.1 ～ 4) MPa
- Frequency range: 26 GHz
- Output signal: (4 ～ 20) mA / HART
- Power: dual-wire (DC24V) four-wire (DC24V / AC220V)
- Process connection: G / H / I / J / K
- Antenna material: S / T / V
- Flange accessories: L / M / N / P
- LCD optional
ADT-901 Pneumatic Test Pump -0.4 up tp 0.4 bar
- Pressure range : -0,4 up to 0,4 bar
- Media : Air
- Adjustment resolution: 0,001 mbar
- Material : Body: SS & aluminum ~ Ram/adapters: SS ~ Seals: Buna-N
- Connections: 1/4NPT F, 1/4BSP F, or M20X1.5 F
- Dimensions: Base : 240×130 ~ Height ×130 (mm) 1.5 kg
- User-friendly, robust design and reliable performance
IO-8TCS Thermocouple Isolated Analog Input Module
- 8 isolated Thermocouples inputs
- Modbus RTU compatible
- Type: J, K, E, T, N, B, S, R, mV, C, D & G
- Insulation: 1500 Vrms (350 V between channels)
- Power supply: 12 V - 24 Vdc
- Up to 128 modules on the RS485 network
- Indication LEDs
- Rai-din fixing
- Module configuration software
- User Manual
TNU Ultrasonic level transmitter
- 4 ~ 20mA 2 inputs (fully isolated) HART
- Power supply: 7-30Vdc
- IP67
- Transmitter material: PVDF
- Internal temperature compensation
- Beam angle: 7
- Unaffected by liquid temperature or viscosity
- Maximum measurement: 12m
ADT-912 Pneumatic Low Pressure Test Pump 4 bar
- Pressure range : 95% of vacuum up to 4 bar
- Media : Air
- Adjustment resolution: 0,001 mbar
- Material : Body: SS & aluminum ~ Ram/adapters: SS ~ Seals: Buna-N
- Connections: 1/4NPT F, 1/4BSP F, or M20X1.5 F
- Dimensions: Base : 273×258 ~ Height ×140 (mm) 2.8 kg
- User-friendly, robust design and reliable performance
IO-8TC Analog Thermocouple Input Module
- 8 Thermocouples inputs
- Modbus RTU compatible
- Type: J, K, E, T, N, B, S, R, mV, C, D & G
- Insulation: 1500 Vrms
- Power supply: 12 V - 24 Vdc
- Up to 128 modules on the RS485 network
- Indication LEDs
- Rai-din fixing
- Module configuration software
- User Manual
TNUC 551 Ultrasonic level transmitter
- Measuring range: Liquid (0.25 ～ 4) m
- Process connection: G1½A
- PTFE 、 PU / PC
- Process temperature: (-40 ～ 70) ° C
- Process pressure: (-0.02 ～ 0.1) MPa
- Output signal: (4 ～ 20) mA / HART
- Power: dual-wire (DC24V) four-wire (DC24V / AC220V)
ADT-914 - Pneumatic Pressure Test Pump 25 bar
- Pressure range : 95% of vacuum up to 25 bar
- Media : Air
- Adjustment resolution: 0,1 mbar
- Material : Body: SS & aluminum ~ Ram/adapters: SS ~ Seals: Buna-N
- Connections: 1/4NPT F, 1/4BSP F, or M20X1.5 F
- Dimensions: Base : 240×120 ~ Height ×130 (mm) 1.5 kg
- User-friendly, robust design and reliable performance
ADT-916 - Pneumatic Pressure Test Pump 40 bar
- Pressure range : 95% of vacuum up to 40 bar
- Media : Air
- Adjustment resolution: 0,1 mbar
- Material : Body: SS & aluminum ~ Ram/adapters: SS ~ Seals: Buna-N
- Connections: 1/4NPT F, 1/4BSP F, or M20X1.5 F
- Dimensions: Base : 315×198 ~ Height ×140 (mm) 2.7 kg
- User-friendly, robust design and reliable performance
IO-8AIIS Current Differential Analog Input Module
- 8 current differential inputs
- Modbus RTU compatible
- Current: 0 - 20 mA
- Offset: 4 mA
- Insulation: 1000 Vrms (350 V between channels)
- Up to 128 modules on the RS485 network
- Indication LEDs
- Rai-din fixing
- Module configuration software
- User Manual
English
Français
