• * Galvanic isolation
• * No external power supply for configuration
• * Write or read the configuration off-line by just connecting a PC
• * Fault signal on sensor break or short circuit
• * 2 wire technology, 4 to 20mA analogue output
• * High accuracy in total ambient temperature range
• * Customer specific measurement range setting or expanded SETUP

• 6 universal channels
• 0.2% accuracy
• Printing: 6 colors
• Dustproof, IP-65 waterproof
• RS-232 communication interface
• Universal entrance and range
• UL, CSA, CE compliance
• 144 (L) x144 (H) x150 (D) mm Weight 1.54 kg
• 1 pack of print sheet
• 1 ink ribbon

• * Dimensions:   44mm×22.5mm(Φ×H)
• * Output:   4 to 20mA
• * Supply voltage:   11.5 to 35VDC (non-Ex-Area) 11.5 to 30VDC (Ex-Area)
• * Input:   RTD, TC, Ohm, mV
• * Operation:   HART-protocol
• * Galvanic isolation(In/Out):  2KVAC
• * Installation:  sensor head Form B

• High measurement accuracy: Accuracy: 0.5%
• Wide measuring range: DN15 to DN6000
• Energy meter: Measurement of thermal and cooling energy
• Wide temperature range: Fluid from -30 ° C to 160 ° C
• Multiple communication interface as standard:
• Outputs: RS-485 Modbus RTU ~ 1x 4-20 mA ~ 1x Pulse ~ 1x Relay
• Inputs: 3x 4-20mA (acquisition of temperature, pressure, level signals, etc.)
• Multiple materials and pressures available:
• Carbon steel, 304 stainless steel, 316 stainless steel, 1.0 Mpa, 1.6 Mpa, 2.5 Mpa
• IP68 protection - Fully waterproof: Does not fear splashing water or humid environments
• Waterproof keyboard: 4 keys - settings and multiple functions

• Thermal & cooling energy Advanced technology & electronics
• Easy to install & use
• Accuracy, stability & longevity
• Communications & remote reading
• Compact & robust design
• Vertical or horizontal mounting
• Multifunctional display/ 8 digit LCD screen
• Long life battery or power supply
• Suitable for lower water quality

• 8 isolated Thermocouples inputs
• Modbus RTU compatible
• Type: J, K, E, T, N, B, S, R, mV, C, D & G
• Insulation: 1500 Vrms (350 V between channels)
• Power supply: 12 V - 24 Vdc
• Up to 128 modules on the RS485 network
• Indication LEDs
• Rai-din fixing
• Module configuration software
• User Manual

• 8 Thermocouples inputs
• Modbus RTU compatible
• Type: J, K, E, T, N, B, S, R, mV, C, D & G
• Insulation: 1500 Vrms
• Power supply: 12 V - 24 Vdc
• Up to 128 modules on the RS485 network
• Indication LEDs
• Rai-din fixing
• Module configuration software
• User Manual

For all clear, non biphasic liquids and all types of pipes from DN20 to DN 1200 : 

• Measurement accuracy 1% F.S
• Communications : 4~20 mA & RS485 Modbus
• Programmable data logger 16 GB SD card
• Battery 16 hours autonomy
• Non-invasive transducers Stainless steel IP68
• Mounting rails for optimal measurement
• Energy metering included
• 2x TT02 IP68 transducers
• -40 °C ~ 80 °C (130°C optional)
• Suitable for pipes DN 20 mm to DN 1200 mm
• Mounting rails with strip and clamps
• Standard cable length: 5 meters
• 2x non-intrusive PT100 IP68 temperature sensors
• Measurement of thermal & cooling energy

• 8 current differential inputs
• Modbus RTU compatible
• Current: 0 - 20 mA
• Offset: 4 mA
• Insulation: 1000 Vrms (350 V between channels)
• Up to 128 modules on the RS485 network
• Indication LEDs
• Rai-din fixing
• Module configuration software
• User Manual

• Hose material: Metal/ Rigid plastic tube made of PCV, PP or PVDF
• Liquid type: Water/Other (fluids without solid particles or impurities)
• 0-75° (no surface freezing)
• Low speed cut-off value: 0.1m/s
• Display: 256*128, LCD
• Response time: 0.5-60s
• Accuracy: +/-2%, (+/-1% after calibration)
• Data storage period: 300ms
• Memory for data saving: EEPROM, data storage more than 10 years
• I/O power supply: M12 type aviation plug
• Output: 4-20mA
• Communication: Modbus RS485
• Option for output: OCT, alarm relay 
• Power supply: 10-24VVDC
• Electrical power : <3W
• Ambient temperature : -10° to 60°C
• Cable length: 2m, PT100 sensor cable length is 9m

• 8 voltage inputs
• Modbus RTU compatible
• Voltage: 0 - 10 Vdc & 0 - 5 Vdc
• Offset: 2 Vdc [0-10] & 1 Vdc [1-5]
• Insulation: 1500 Vrms
• Up to 128 modules on the RS485 network
• Indication LEDs
• Rai-din fixing
• Module configuration software
• User Manual

• Hose material: Metal/ rigid plastic tube made of PCV, PP or PVDF
• Liquid type: Water/Other (fluids without solid particles or impurities)
• 0-75° (no surface freezing)
• Low speed cut-off value: 0.1m/s
• Display: 256*128, LCD
• Response time: 0.5-60s
• Accuracy: +/-2%, (+/-1% after calibration)
• Data storage period: 300ms
• Memory for data saving: EEPROM, data storage more than 10 years
• I/O power supply: M12 type aviation plug
• Output: 4-20mA
• Communication: Modbus RS485
• Option for output: OCT, alarm relay 
• Power supply: 10-24VVDC
• Electrical power : <3W
• Ambient temperature : -10° to 60°C
• Cable length: 2m, PT100 sensor cable length is 9m

• 8 isolated voltage inputs
• Modbus RTU compatible
• Voltage: 0 - 10 Vdc & 0 - 5 Vdc
• Offset: 2 Vdc [0-10] & 1 Vdc [1-5]
• Insulation: 1500 Vrms (350 V between channels)
• Up to 128 modules on the RS485 network
• Indication LEDs
• Rai-din fixing
• Module configuration software
• User Manual

• 8 current outputs
• Modbus RTU compatible
• Current: 0 - 20 mA
• Offset: 4 mA
• Insulation: 1500 Vrms
• Up to 128 modules on the RS485 network
• Indication LEDs
• Rai-din fixing
• Module configuration software
• User Manual

• 8 voltage outputs
• Modbus RTU compatible
• Voltage: 0 - 10 Vdc
• Offset: 2 Vdc
• Insulation: 1500 Vrms
• Up to 128 modules on the RS485 network
• Indication LEDs
• Rai-din fixing
• Module configuration software
• User Manual