• Accuracy: ± 0.05% of full scale
• Units: kPa, Pa, PSI, Kg / cm², Bar, MPa
• Display: Large LCD screen with 5 DIGIT dual display
• Keys: On / Off, Reset, backlight
• Connection: 1/4 ’’ NPT, 1/4 ’’ G (or customizable)
• Dial size: 105 mm
• Pressure and temperature display simultaneously
• Max & min pressure recording
• Battery alarm function
• Ease of use, robust design and reliable performance
• Lithium battery 1 year autonomy in 24 hour operation
• Delivered in a storage case
• Calibration certificate with factory traceability
• ISO17025 certificate COFRAC equivalent or NIST optional

• Precision: 0.25%
• Vacuum pressure up to 4200 bar
• Temperature compensation of -10 ° C and 50 ° C
• 13 selectable pressure units, 6 programmable measurement units
• Large display for better reading: 5 digits
• Backlit display
• Menu as icons
• Visual warning when the pressure exceeds 120% of P.E
• Pressure gauge in hardened steel
• IP67 (submersible up to 1 meter in water)
• 2 AA alkaline batteries
• CE RTTE, FCC ID, IC ID certifications
• ISO 17025 certificate included

*Output: 4 to 20mA

*Supply voltage: 7.5 to 45VDC

*Input: RTD, TC, Ohm, mV

*Accuracy(Pt100): <0.2K or 0.08%

*Cold junction: Internal

*Galvanic isolation: 2 KVAC(In/Out)

*Influence of ambient: Negligible

*Load influence: Negligible

*Power supply influence: Negligible

*Resolution: 0.3uA

*Operation: HART-protocol

*Installation: sensor head Form B

*Dimensions: 44mm×24mm(Φ×H)

*Weight: approx. 35g

• Precision: 0.1%
• Vacuum pressure up to 4200 bar
• Temperature compensation of -10 ° C and 50 ° C
• 13 selectable pressure units, 6 programmable measurement units
• Large display for better reading: 5 digits
• Backlit display
• Menu as icons
• Visual warning when the pressure exceeds 120% of P.E
• Pressure gauge in hardened steel
• IP67 (submersible up to 1 meter in water)
• 2 AA alkaline batteries
• CE RTTE, FCC ID, IC ID certifications
• ISO 17025 certificate included

• Dimensions: 44mm×22.5mm(Φ×H)
• Output: 4 to 20mA
• Supply voltage: 8 to 35VDC (non-Ex-Area)
•                              8 to 30VDC (Ex-Area)
• Input: PT100
• Installation: sensor head Form B

• Accuracy: 0.05%
• Data logger + WIFI
• Vacuum pressure up to 4200 bar
• Temperature compensation of -10 ° C and 50 ° C
• 13 selectable pressure units, 6 programmable measurement units
• Large display for better reading: 5 digits
• Backlit display
• Menu as icons
• Visual warning when the pressure exceeds 120% of P.E
• Pressure gauge in hardened steel
• IP67 (submersible up to 1 meter in water)
• 2 AA alkaline batteries
• CE RTTE, FCC ID, IC ID certifications
• ISO 17025 certificate included

• * Galvanic isolation
• * No external power supply for configuration
• * Write or read the configuration off-line by just connecting a PC
• * Fault signal on sensor break or short circuit
• * 2 wire technology, 4 to 20mA analogue output
• * High accuracy in total ambient temperature range
• * Customer specific measurement range setting or expanded SETUP

• Accuracy: 0.1%
• Data logger + WIFI
• Vacuum pressure up to 4200 bar
• Temperature compensation of -10 ° C and 50 ° C
• 13 selectable pressure units, 6 programmable measurement units
• Large display for better reading: 5 digits
• Backlit display
• Menu as icons
• Visual warning when the pressure exceeds 120% of P.E
• Pressure gauge in hardened steel
• IP67 (submersible up to 1 meter in water)
• 2 AA alkaline batteries
• CE RTTE, FCC ID, IC ID certifications
• ISO 17025 certificate included

• * Dimensions:   44mm×22.5mm(Φ×H)
• * Output:   4 to 20mA
• * Supply voltage:   11.5 to 35VDC (non-Ex-Area) 11.5 to 30VDC (Ex-Area)
• * Input:   RTD, TC, Ohm, mV
• * Operation:   HART-protocol
• * Galvanic isolation(In/Out):  2KVAC
• * Installation:  sensor head Form B

• Accuracy: 0.25%
• Data logger + WIFI
• Vacuum pressure up to 4200 bar
• Temperature compensation of -10 ° C and 50 ° C
• 13 selectable pressure units, 6 programmable measurement units
• Large display for better reading: 5 digits
• Backlit display
• Menu as icons
• Visual warning when the pressure exceeds 120% of P.E
• Pressure gauge in hardened steel
• IP67 (submersible up to 1 meter in water)
• 2 AA alkaline batteries
• CE RTTE, FCC ID, IC ID certifications
• ISO 17025 certificate included

• 4 ~ 20mA 2 inputs (fully isolated) HART
• Power supply: 7-30Vdc
• IP67
• Transmitter material: PVDF
• Internal temperature compensation
• Beam angle: 7
• Unaffected by liquid temperature or viscosity
• Maximum measurement: 12m