*Output: 4 to 20mA

*Supply voltage: 7.5 to 45VDC

*Input: RTD, TC, Ohm, mV

*Accuracy(Pt100): <0.2K or 0.08%

*Cold junction: Internal

*Galvanic isolation: 2 KVAC(In/Out)

*Influence of ambient: Negligible

*Load influence: Negligible

*Power supply influence: Negligible

*Resolution: 0.3uA

*Operation: HART-protocol

*Installation: sensor head Form B

*Dimensions: 44mm×24mm(Φ×H)

*Weight: approx. 35g

• Accuracy: 1%
• Non-intrusive transducers
• DN15 to DN6000 ~ depending on type of transducers
• Energy meter option: thermal and cooling energy
• Communication: RS-485 Modbus RTU
• Outputs: 1x 4-20mA ~ 1x 4-20mA ~ 1x Pulse ~ 1x Relay
• Inputs: 3 x 4-20mA
• Integrated data logger: SD card slot
• IP67 flowmeter ~ IP68 transducers
• Compact & Robust
• Dimensions: 13 cm × 15 cm × 8 cm ~ Weight: 1 kg
• 2x High temperature non-intrusive transducers -30 ° C to 160 ° C
• FREE mounting rail with transducers
• Energy meter - 2 non-intrusive PT100 probes

• 3.5 "TFT LCD screen (320 x 240)
• RS485 modbus
• 24V power supply output
• USB port
• Multiple display
• Calendar search functions by date and time
• Review historical data

• Dimensions: 44mm×22.5mm(Φ×H)
• Output: 4 to 20mA
• Supply voltage: 8 to 35VDC (non-Ex-Area)
•                              8 to 30VDC (Ex-Area)
• Input: PT100
• Installation: sensor head Form B

• 6 universal channels
• 0.2% accuracy
• Printing: 6 colors
• Dustproof, IP-65 waterproof
• RS-232 communication interface
• Universal entrance and range
• UL, CSA, CE compliance
• 144 (L) x144 (H) x150 (D) mm Weight 1.54 kg
• 1 pack of print sheet
• 1 ink ribbon

• * Galvanic isolation
• * No external power supply for configuration
• * Write or read the configuration off-line by just connecting a PC
• * Fault signal on sensor break or short circuit
• * 2 wire technology, 4 to 20mA analogue output
• * High accuracy in total ambient temperature range
• * Customer specific measurement range setting or expanded SETUP

• 6 RTD inputs (2 & 3 files)
• PT100, Ni120, PT1000; Ni1000 -Din ...
• Modbus RTU compatible
• Insulation: 1500 Vrms
• Power supply: 12 V - 24 Vdc
• Up to 128 modules on the RS485 network
• Indication LEDs
• Rai-din fixing
• Module configuration software
• User Manual

• High measurement accuracy: Accuracy: 0.5%
• Wide measuring range: DN15 to DN6000
• Energy meter: Measurement of thermal and cooling energy
• Wide temperature range: Fluid from -30 ° C to 160 ° C
• Multiple communication interface as standard:
• Outputs: RS-485 Modbus RTU ~ 1x 4-20 mA ~ 1x Pulse ~ 1x Relay
• Inputs: 3x 4-20mA (acquisition of temperature, pressure, level signals, etc.)
• Multiple materials and pressures available:
• Carbon steel, 304 stainless steel, 316 stainless steel, 1.0 Mpa, 1.6 Mpa, 2.5 Mpa
• IP68 protection - Fully waterproof: Does not fear splashing water or humid environments
• Waterproof keyboard: 4 keys - settings and multiple functions

• * Dimensions:   44mm×22.5mm(Φ×H)
• * Output:   4 to 20mA
• * Supply voltage:   11.5 to 35VDC (non-Ex-Area) 11.5 to 30VDC (Ex-Area)
• * Input:   RTD, TC, Ohm, mV
• * Operation:   HART-protocol
• * Galvanic isolation(In/Out):  2KVAC
• * Installation:  sensor head Form B

• 8 isolated Thermocouples inputs
• Modbus RTU compatible
• Type: J, K, E, T, N, B, S, R, mV, C, D & G
• Insulation: 1500 Vrms (350 V between channels)
• Power supply: 12 V - 24 Vdc
• Up to 128 modules on the RS485 network
• Indication LEDs
• Rai-din fixing
• Module configuration software
• User Manual

• Thermal & cooling energy Advanced technology & electronics
• Easy to install & use
• Accuracy, stability & longevity
• Communications & remote reading
• Compact & robust design
• Vertical or horizontal mounting
• Multifunctional display/ 8 digit LCD screen
• Long life battery or power supply
• Suitable for lower water quality

• 8 Thermocouples inputs
• Modbus RTU compatible
• Type: J, K, E, T, N, B, S, R, mV, C, D & G
• Insulation: 1500 Vrms
• Power supply: 12 V - 24 Vdc
• Up to 128 modules on the RS485 network
• Indication LEDs
• Rai-din fixing
• Module configuration software
• User Manual