*Output: 4 to 20mA

*Supply voltage: 7.5 to 45VDC

*Input: RTD, TC, Ohm, mV

*Accuracy(Pt100): <0.2K or 0.08%

*Cold junction: Internal

*Galvanic isolation: 2 KVAC(In/Out)

*Influence of ambient: Negligible

*Load influence: Negligible

*Power supply influence: Negligible

*Resolution: 0.3uA

*Operation: HART-protocol

*Installation: sensor head Form B

*Dimensions: 44mm×24mm(Φ×H)

*Weight: approx. 35g

• Dimensions: 44mm×22.5mm(Φ×H)
• Output: 4 to 20mA
• Supply voltage: 8 to 35VDC (non-Ex-Area)
•                              8 to 30VDC (Ex-Area)
• Input: PT100
• Installation: sensor head Form B

• * Galvanic isolation
• * No external power supply for configuration
• * Write or read the configuration off-line by just connecting a PC
• * Fault signal on sensor break or short circuit
• * 2 wire technology, 4 to 20mA analogue output
• * High accuracy in total ambient temperature range
• * Customer specific measurement range setting or expanded SETUP

• * Dimensions:   44mm×22.5mm(Φ×H)
• * Output:   4 to 20mA
• * Supply voltage:   11.5 to 35VDC (non-Ex-Area) 11.5 to 30VDC (Ex-Area)
• * Input:   RTD, TC, Ohm, mV
• * Operation:   HART-protocol
• * Galvanic isolation(In/Out):  2KVAC
• * Installation:  sensor head Form B

• Precision: ± 0.5%, or ± 0.25%, of full scale
• Units: Bar MPa, PSI
• Relative pressure: -1 bar up to 2000 bar
• Differential pressure: 60 mbar up to 25 bar
• Switch: relay signal adjustable over the whole scale
• Display: Large red 4 DIGIT LED screen
• Keys: On / Off, ZERO, UNIT, SET
• Connection: 1/4 ’’ NPT, 1/4 ’’ BSP, 1/4 ’’ G (or customizable)
• Dial size: 80 mm
• All stainless steel fitting and housing
• 220VAC or 24VDC power supply
• CE & Ex ExibII BT4 certificate
• Factory calibration certificate optional
• ISO17025 calibration certificate optional

For all clear, non-diphasic liquids and for all types of pipes from DN20 to DN1200:

• Accuracy of measurement 1 % F.S.
• Communications : 4~20 mA & RS485 Modbus
• Programmable data logger 16 GB SD card
• 16 hours battery life
• Non-invasive transducers Stainless steel IP68
• Mounting rails for optimal measurement
• 2x TT02 Transducers IP68 DN20 to DN1200
  -40 °C ~ 80°C
• Mounting rails with strip and clamps
• Standard cable length: 5 meters
• Optional energy meter

• Measuring range: 200Pa-40MPa
• Output signal: 4-20mA, 4 ~ 20mA / HART, client
• Reference accuracy: ± 0.075% URL, optional ± 0.05% URL
• Fluid temperature: -40-120
• Measuring fluid: level, density and pressure of the liquid, gas or vapor
• Protection class: IP67
• Diaphragm material: SUS316L, Hastelloy C
• Stability: ± 0.2% URL / 60 months
• Process connection: M20 * 1.5 (M), 1 / 2-14NPT (F), 1 / 4-18NPT (F)
• Approvals: ATEX, IECEx, NEPSI, RoHS, CE