English
Français
Subcategories
- New
PPC-D Calibrateur de pression portable Pneumatique &...
- Pneumatic Pressure: -0.85 to 20 bar.
- Hydraulic Pressure: 0 to 400 bar.
- Accuracy: ±0.025% FS.
- Temperature Compensation: Automatic from 0 to 50 °C.
- Selectable Pressure Units: kg/cm², psi, bar, mbar, etc.
- Current Input: 50 mA active, 25 mA passive, 800 Ω resistance.
- Voltage Input: 0 to 30 VDC, resolution 0.01 (mA/V).
- Switch Test: Up to 5 VDC.
- Media: Air and oil.
- Overpressure Alarm: 120% FS (visual and audible).
- Pressure Generation: Built-in pumps with fine adjustment vernier.
- Power Supply: Rechargeable 7.2 Volts (AA) battery.
- Operating Temperature: 15 °C to 40 °C.
- Storage Temperature Range: 10 °C to 60 °C.
- Protection Class: IP10.
- Zero Adjustment: Automatic if pressure is less than 1% FS.
- New
Temperature and humidity transmitter HT7S
- Rugged weather proof enclosure with Exproof enclosure as an option
- Available in Wall and Duct mounting versions.
- Three variants.
- Measuring Range: 0-100% RH in models, suitable formmany applications
- Class-A RTD Pt 100 sensor used for temperature measurement
- Linearised analog 4-20mA signal output (2wire loop powered)
- Replaceable humidity sensor assembly
- Capacitance based sensing.
- High Accuracy
- Excellent long-term stability
- New
Channel scanner / protective relay with data logger 85XX +
- Universal input for each Analog Input
- IP65 for Weather proof protection
- Easy Programming by front Touch sense keypad
- Fast Sampling rate with instantaneous relay action
- Four relays for alarm/trip
- RS485 Serial communication port for remote monitoring
- Multiple Levels of configuration and password protection
- Comprehensive Alarm/Trip logic programming
- Re transmission output (Optional)
- New
PCAL-223 Digital calibrator
- Accuracy: ± 0.02%, ± 0.05%, ± 0.1% of full scale
- 10 Units: Pa, kPa, MPa, PSI, Kg / cm², Bar, mBar, cmH20, mmH20, mmHg
- Pressures: Relative, differential, Absolute
- Display: Large LCD screen 6 Digits double display & bargraph
- Connection: 1/4 ’’ NPT, 1/4 ’’ BSP, 1/4 ’’ G (or customizable)
- Measurement & simulation of electrical signals
- 10 function keys
- Temperature compensation from 0 to 50 ° C
- 60 hour rechargeable lithium battery
- HART function
- RS232 interface
- Integrated data logger
- Clean design & high performance
- CE & Exic II BT6Gc approved
- Calibration certificate with factory traceability
- ISO17025 certificate optional
- New
PPC-D+ Calibrateur de pression portable Pneumatique &...
Pneumatic Pressure: -0.85 to 20 bar.Hydraulic Pressure: 0 to 400 bar.Accuracy: ±0.025% FS.Temperature Compensation: Automatic from 0 to 50 °C.Selectable Pressure Units: kg/cm², psi, bar, mbar, etc.Current Input: 50 mA active, 25 mA passive, 800 Ω resistance.Voltage Input: 0 to 30 VDC, resolution 0.01 (mA/V).Switch Test: Up to 5 VDC.Media: Air and oil.Overpressure Alarm: 120% FS (visual and audible).Pressure Generation: Built-in pumps with fine adjustment vernier.Power Supply: Rechargeable 7.2 Volts (AA) battery.Operating Temperature: 15 °C to 40 °C.Storage Temperature Range: 10 °C to 60 °C.Protection Class: IP10.Zero Adjustment: Automatic if pressure is less than 1% FS.
- New
PPC-H 200 Hydraulic pressure calibrator 0 to 200 Bar ± 0.05%
Models: PPC-H (accuracy 0.05% FS)
Pressure Range: 0 to 200 Bar.Temperature Compensation: 0 °C to 50 °C.
Display: Backlit LCD, 5-digit resolution, multiple units (Pa, Bar, PSI, mmHg, etc.).
Inputs: Current (50 mA active / 25 mA passive), voltage (0-30 VDC), resolution 0.001.
Pressure Generation: Integrated pneumatic/hydraulic pumps with fine adjustment.
Construction: Robust IP10 case, 330 x 235 x 125 mm, 6 kg.
Overpressure Alarm: 120% FS (visual/audible).
Power Supply: Rechargeable battery.
Delivery: Calibrator, adapters, test kit, oil, RS-232, manual.
Pressure Range: 0 to 200 Bar.Temperature Compensation: 0 °C to 50 °C.
Display: Backlit LCD, 5-digit resolution, multiple units (Pa, Bar, PSI, mmHg, etc.).
Inputs: Current (50 mA active / 25 mA passive), voltage (0-30 VDC), resolution 0.001.
Pressure Generation: Integrated pneumatic/hydraulic pumps with fine adjustment.
Construction: Robust IP10 case, 330 x 235 x 125 mm, 6 kg.
Overpressure Alarm: 120% FS (visual/audible).
Power Supply: Rechargeable battery.
Delivery: Calibrator, adapters, test kit, oil, RS-232, manual.
- New
copy of Calibrateur de pression portable PPC-P (Plage : -0,85...
Pressure range: -0.85 to 2 barPressure measurement and generationAccuracy: ± 0.05% FSTemperature compensation: 0 °C to 50 °CSelectable measurement units:Kg/cm², Bar, mBar, PSI, mH₂O, mmH₂O, cmH₂O, inH₂O, ftH₂O, mmHg, inHg, Atm, MPa, kPa, PaCurrent measurement: Active loop: 50 mA, Passive loop: 25 mA, Load resistance: 800 ΩVoltage measurement: 0 to 30 VDCResolution (mA / V): 0.001Switch test: Maximum 5 VDCMedium: AirOverpressure alarm: Visual and audible, 120% FSPressure generation: Integrated pneumatic pump with fine adjustment vernier and depressurization valvePower supply: Rechargeable 7.2 V AA batteryDimensions / Weight: 330 x 235 x 125 mm, 4 kg
€0.00
- New
PI-PH6.0 PH Meter
- Measure range: pH: 0-14 pH, ±0.02pH;
- ORP: -1000 ~1000mV, ±1mV
- Input Resistance: ≥10~12Ω
- Temperature compensation : Manual/ Auto temperature compensation
- Signal output : 4-20mA, maximum loop 750Ω, 0.2%FS
- Communication : RS485 Modbus-RTU
- Relay output : 250V, 3A
- Power supply: 220V±10%，50Hz/60Hz
€250.00
- New
PIR6400 80GHz Radar Level Transmitter in thread version
- Non-contact level measurement of liquids
- Applicable for continuous level measurement of liquids
with slightly aggressiveness in storage containers, reactors or process vessels. - Measuring ranges : 0 ~ 30m
- Accuracy : ± 2mm
- Process pressure : -1 bar ~ 2 bar
- Process temperature : -40℃ ~ +200℃
- Media-conracting materials :
Process fittings: 316L
Antenna: PEEK PTFE
Seal: FKM, EPDM, KALREZ - Display and Adjustment LCD display, tank side display and tank side hub
- Communications : HART, RS485 Modbus, 4-20 mA...
- Protect Level : IP67
- Ex information : EX ia IIC T6 Ga Ex d ia [iaGa] IIC T6/T2 Gb
- Different Models depending on the application
- New
TT7S10-D and TT7S10-XP loop powered temperature transmitters
- Universal input (RTD, Thermocouple, Ohm, mV)
- Available in below options :
TT7S10-D: Din Rail mount with 3″, 4 digit LED display
TT7S10-XP: Wall or 2″ Pipe mount Ex-proof Transmitter with touch sense keys - 0.56″, 4 digit LED display in Single Compartment
- 0.39″, 4 digit LED display in Dual Compartment
- 1.5 KV RMS Isolation between Input & Output Linearized Output
- Highly Accurate
- Fully Programmable for Input type & Range
- Digital Filter
- Easy configuration using keys and display
- Windows mTRAN software for Configuration, Calibration & Monitoring
- Reverse Loop polarity protection
- Direct / Reverse output
- Sensor break detection
- New
Channel Logger / DAQ Module 8040
- 16 – 128 channel configuration
- Scans 128 channels in 3 seconds
- Two user dedicated serial communication Ports + one OT/HMI port
- Ethernet port / USB port (optional)
- 2 x 16 character LCD Operator display terminal
- Universal input for each channel
- Channel to channel input isolation option
- Battery backed memory with RTC
- Periodic Memory (25 MB)
- Host computer/ operator terminal programmable
- Pre Fab cable with DIN terminal Modules as accessories
- Field to Logic Isolation on Input cards
- New
PI700X Digital precision pressure gauge 0.05% with Recorder
- Pressure: relative
- Details: 0.05% of full scale
- Connexion : 1/2" G (M)
- 11 Units: Pa, kPa, MPa, PSI, Kg / cm², Bar, mmBar, cmH20 ...
- Display: Large LCD screen 5 or 6 Digit & Bargraph in%
- 7 function keys
- Temperature compensation from 0 to 50 ° C
- 60 hour rechargeable lithium battery
- Integrated data logger
- Clean design & high performance
- CE & Exia II CT4Ga approved
- Calibration certificate with factory traceability
€990.00