• Output: 4 to 20mA
• Supply voltage:  7.5 to 45VDC
• Input:  RTD, TC, Ohm, mV
• Cold junction:  Internal
• Influence of ambient:  Negligible
• Load influence: Negligible
• Power supply influence:  Negligible
• Resolution:  0.3uA
• Installation:  sensor head Form B
• Operation:  PC-programmable

• Accuracy: 1%
• Non-intrusive transducers
• DN20 to DN6000 ~ depending on type of transducers
• Rechargeable battery, Autonomy 50 hours
• Data logger
• Communication: RS-485 Modbus RTU
• Output: 4-20mA
• IP67 flowmeter ~ IP68 transducers
• Compact & Robust
• Dimensions: 270 × 215 × 175 mm ~ Weight: 3 kg
• 2x Non-intrusive transducers -35 ° C to 85 ° C
• Other output (optional): Pulse, Relay
• Energy meter option

*Output: 4 to 20mA

*Supply voltage: 7.5 to 45VDC

*Input: RTD, TC, Ohm, mV

*Accuracy(Pt100): <0.2K or 0.08%

*Cold junction: Internal

*Galvanic isolation: 2 KVAC(In/Out)

*Influence of ambient: Negligible

*Load influence: Negligible

*Power supply influence: Negligible

*Resolution: 0.3uA

*Operation: HART-protocol

*Installation: sensor head Form B

*Dimensions: 44mm×24mm(Φ×H)

*Weight: approx. 35g

• Dimensions: 44mm×22.5mm(Φ×H)
• Output: 4 to 20mA
• Supply voltage: 8 to 35VDC (non-Ex-Area)
•                              8 to 30VDC (Ex-Area)
• Input: PT100
• Installation: sensor head Form B

• Accuracy: 1%
• Non-intrusive transducers
• DN15 to DN6000 ~ depending on type of transducers
• Energy meter option: thermal and cooling energy
• Communication: RS-485 Modbus RTU
• Outputs: 1x 4-20mA ~ 1x 4-20mA ~ 1x Pulse ~ 1x Relay
• Inputs: 3 x 4-20mA
• Integrated data logger: SD card slot
• IP67 flowmeter ~ IP68 transducers
• Compact & Robust
• Dimensions: 13 cm × 15 cm × 8 cm ~ Weight: 1 kg
• 2x High temperature non-intrusive transducers -30 ° C to 160 ° C
• FREE mounting rail with transducers
• Energy meter - 2 non-intrusive PT100 probes

• * Galvanic isolation
• * No external power supply for configuration
• * Write or read the configuration off-line by just connecting a PC
• * Fault signal on sensor break or short circuit
• * 2 wire technology, 4 to 20mA analogue output
• * High accuracy in total ambient temperature range
• * Customer specific measurement range setting or expanded SETUP

• Accuracy: 1%
• Non-intrusive transducers
• DN20 to DN6000 ~ depending on type of transducers
• Rechargeable battery, Autonomy 50 hours
• Data logger
• Communication: RS-485 Modbus RTU
• Output: 4-20mA
• IP67 flowmeter ~ IP68 transducers
• Compact & Robust
• Dimensions: 270 × 215 × 175 mm ~ Weight: 3 kg
• 2x Non-intrusive transducers -35 ° C to 85 ° C
• Other output (optional): Pulse, Relay

• * Dimensions:   44mm×22.5mm(Φ×H)
• * Output:   4 to 20mA
• * Supply voltage:   11.5 to 35VDC (non-Ex-Area) 11.5 to 30VDC (Ex-Area)
• * Input:   RTD, TC, Ohm, mV
• * Operation:   HART-protocol
• * Galvanic isolation(In/Out):  2KVAC
• * Installation:  sensor head Form B

• High measurement accuracy: Accuracy: 0.5%
• Wide measuring range: DN15 to DN6000
• Energy meter: Measurement of thermal and cooling energy
• Wide temperature range: Fluid from -30 ° C to 160 ° C
• Multiple communication interface as standard:
• Outputs: RS-485 Modbus RTU ~ 1x 4-20 mA ~ 1x Pulse ~ 1x Relay
• Inputs: 3x 4-20mA (acquisition of temperature, pressure, level signals, etc.)
• Multiple materials and pressures available:
• Carbon steel, 304 stainless steel, 316 stainless steel, 1.0 Mpa, 1.6 Mpa, 2.5 Mpa
• IP68 protection - Fully waterproof: Does not fear splashing water or humid environments
• Waterproof keyboard: 4 keys - settings and multiple functions

• Maximum measurement range: 15m
• Measurement accuracy: ± 10 mm
• Process temperature: (-40 ～ 80) ° C (-40 ～ 120) ° C (-40 ～ 250) ° C
• Process pressure: Normal, (-0.1 ～ 4) MPa
• Frequency range: 26 GHz
• Output signal: (4 ～ 20) mA / HART
• Power: dual-wire (DC24V) four-wire (DC24V / AC220V)
• Process connection: G / H / I / J / K
• Antenna material: S / T / V
• Flange accessories: L / M / N / P
• LCD optional

• Thermal & cooling energy Advanced technology & electronics
• Easy to install & use
• Accuracy, stability & longevity
• Communications & remote reading
• Compact & robust design
• Vertical or horizontal mounting
• Multifunctional display/ 8 digit LCD screen
• Long life battery or power supply
• Suitable for lower water quality

• 4 ~ 20mA 2 inputs (fully isolated) HART
• Power supply: 7-30Vdc
• IP67
• Transmitter material: PVDF
• Internal temperature compensation
• Beam angle: 7
• Unaffected by liquid temperature or viscosity
• Maximum measurement: 12m

For all clear, non biphasic liquids and all types of pipes from DN20 to DN 1200 : 

• Measurement accuracy 1% F.S
• Communications : 4~20 mA & RS485 Modbus
• Programmable data logger 16 GB SD card
• Battery 16 hours autonomy
• Non-invasive transducers Stainless steel IP68
• Mounting rails for optimal measurement
• Energy metering included
• 2x TT02 IP68 transducers
• -40 °C ~ 80 °C (130°C optional)
• Suitable for pipes DN 20 mm to DN 1200 mm
• Mounting rails with strip and clamps
• Standard cable length: 5 meters
• 2x non-intrusive PT100 IP68 temperature sensors
• Measurement of thermal & cooling energy

• Measuring range: Liquid (0.25 ～ 4) m
• Process connection: G1½A
• PTFE 、 PU / PC
• Process temperature: (-40 ～ 70) ° C
• Process pressure: (-0.02 ～ 0.1) MPa
• Output signal: (4 ～ 20) mA / HART
• Power: dual-wire (DC24V) four-wire (DC24V / AC220V)