Active filters
-
Categories:
LEVEL
-
Categories:
Temperature
PITMT180L - Temperature transmitter
- Dimensions: 44mm×22.5mm(Φ×H)
- Output: 4 to 20mA
- Supply voltage: 8 to 35VDC (non-Ex-Area)
- 8 to 30VDC (Ex-Area)
- Input: PT100
- Installation: sensor head Form B
PITMT181L - Temperature transmitter
- * Galvanic isolation
- * No external power supply for configuration
- * Write or read the configuration off-line by just connecting a PC
- * Fault signal on sensor break or short circuit
- * 2 wire technology, 4 to 20mA analogue output
- * High accuracy in total ambient temperature range
- * Customer specific measurement range setting or expanded SETUP
PITMT182L - Temperature transmitter
- * Dimensions: 44mm×22.5mm(Φ×H)
- * Output: 4 to 20mA
- * Supply voltage: 11.5 to 35VDC (non-Ex-Area) 11.5 to 30VDC (Ex-Area)
- * Input: RTD, TC, Ohm, mV
- * Operation: HART-protocol
- * Galvanic isolation(In/Out): 2KVAC
- * Installation: sensor head Form B
TNRP59 Liquid pulsed radar level transmitter
- Maximum measurement range: 15m
- Measurement accuracy: ± 10 mm
- Process temperature: (-40 ～ 80) ° C (-40 ～ 120) ° C (-40 ～ 250) ° C
- Process pressure: Normal, (-0.1 ～ 4) MPa
- Frequency range: 26 GHz
- Output signal: (4 ～ 20) mA / HART
- Power: dual-wire (DC24V) four-wire (DC24V / AC220V)
- Process connection: G / H / I / J / K
- Antenna material: S / T / V
- Flange accessories: L / M / N / P
- LCD optional
TNU Ultrasonic level transmitter
- 4 ~ 20mA 2 inputs (fully isolated) HART
- Power supply: 7-30Vdc
- IP67
- Transmitter material: PVDF
- Internal temperature compensation
- Beam angle: 7
- Unaffected by liquid temperature or viscosity
- Maximum measurement: 12m
TNUC 551 Ultrasonic level transmitter
- Measuring range: Liquid (0.25 ～ 4) m
- Process connection: G1½A
- PTFE 、 PU / PC
- Process temperature: (-40 ～ 70) ° C
- Process pressure: (-0.02 ～ 0.1) MPa
- Output signal: (4 ～ 20) mA / HART
- Power: dual-wire (DC24V) four-wire (DC24V / AC220V)
TNUC 553 Ultrasonic level transmitter
- Measuring range: Liquid (0.5 ～ 15) m
- Process connection: Flange or swivelling holder
- PTFE 、 PU / PC
- Process temperature: (-40 ～ 70) ° C
- Process pressure: (-0.02 ～ 0.1) MPa
- Output signal: (4 ～ 20) mA / HART
- Power: dual-wire (DC24V) four-wire (DC24V / AC220V)
MLG Magnetic level indicator - Flapper
- Type: Magnetic level gauge
- Indicator system: Two-color flapper made of PBS plastic, 4 mm long and 0.25 mm thick with
- aligned magnets
- Fleet: SS316, SS316L, SS304, SS304L, PTFE, PVDF, PP, TITANIUM
- IP65, IP66, IP67
- SPDT, 230 VAC, 5 A or 24VDC, 0.5 A
- 4-20 m A
RLG Magnetic level indicator - Swivel shutters
- Type: Magnetic level gauge
- Indicator system: Two-color rotary flappers / Capsule shuttle
- Fleet: SS 304, SS 304L, SS 316, SS 316L, Monel, Titanium, Inconel 600, Hastelloy C, PP, PVDF, Others on request
- IP65, IP66, IP67
- SPDT, 230 VAC, 5 A or 24VDC, 0.5 A
- 4-20 m A
English
Français
