• Pneumatic Pressure: -0.85 to 20 bar.
• Hydraulic Pressure: 0 to 400 bar.
• Accuracy: ±0.025% FS.
• Temperature Compensation: Automatic from 0 to 50 °C.
• Selectable Pressure Units: kg/cm², psi, bar, mbar, etc.
• Current Input: 50 mA active, 25 mA passive, 800 Ω resistance.
• Voltage Input: 0 to 30 VDC, resolution 0.01 (mA/V).
• Switch Test: Up to 5 VDC.
• Media: Air and oil.
• Overpressure Alarm: 120% FS (visual and audible).
• Pressure Generation: Built-in pumps with fine adjustment vernier.
• Power Supply: Rechargeable 7.2 Volts (AA) battery.
• Operating Temperature: 15 °C to 40 °C.
• Storage Temperature Range: 10 °C to 60 °C.
• Protection Class: IP10.
• Zero Adjustment: Automatic if pressure is less than 1% FS.

Température range : 50 °C ~ 650 °C
Accuracy: ± 0.3 °C
Stability: ± 0.02 °C
Resolution: 0.01 °C
Stabilization time: 7 minutes
Temperature unit: °C or °F selectable
Well diameter: 30 mm
Immersion length: 150 mm
Heating time: 10 minutes (Amb. to 120 °C)
Cooling time: 15 minutes (Amb. to (-) 10 °C)
                    25 minutes (120 °C to (-) 10 °C)
Communication port: RS232 port
Calibration software: MET-CAL as standard
Switch test: Provided
Power supply / Consumption: 110V to 240V AC, 50 to 60 Hz, 150 W
Dimensions (W x D x H) / Weight: 160 x 365 x 450 mm / 9 kg
Type of case: Portable
Carrying case: Provided
ISO17025 calibration certificate: Provided

CN-BT (Low Temperature):

• Temperature Range: Ambient Temp. +10 °C to 350 °C
• Accuracy: Less than 0.5% F.S. (Min. 1 °C)
• Stability: ± 0.5 °C
• Resolution: 0.1 °C
• Emissivity: 0.98
• Aperture Diameter: 25 mm
• Time to Reach Max Temperature: 45 minutes
• Stabilization Time: 20 minutes (above 75 °C)
• Dimensions (L x W x H) / Weight: 485 x 430 x 190 mm / 11 kg
• Calibration Certification: Factory with ISO17025 traceability included

CN-HT (High Temperature):

• Temperature Range: 500 °C to 1200 °C
• Accuracy: Less than 0.5% F.S. (Min. 3 °C)
• Stability: ± 0.5 °C
• Resolution: 1 °C
• Emissivity: 0.98
• Aperture Diameter: 25 mm
• Time to Reach Max Temperature: 60 minutes
• Stabilization Time: 20 minutes (above 75 °C)
• Dimensions (L x W x H) / Weight: 485 x 430 x 190 mm / 11 kg
• Calibration Certification: Factory with ISO17025 traceability included

CN-BT (Low Temperature):

• Temperature Range: Ambient Temp. +10 °C to 350 °C
• Accuracy: Less than 0.5% F.S. (Min. 1 °C)
• Stability: ± 0.5 °C
• Resolution: 0.1 °C
• Emissivity: 0.98
• Aperture Diameter: 25 mm
• Time to Reach Max Temperature: 45 minutes
• Stabilization Time: 20 minutes (above 75 °C)
• Dimensions (L x W x H) / Weight: 485 x 430 x 190 mm / 11 kg
• Calibration Certification: Factory with ISO17025 traceability included