Active filters
-
Categories:
Automation
-
Categories:
Calibration
-
Categories:
Flow
ADT-920 Pneumatic Pressure Test Pump 200 bar
- Pressure range : 95% of vacuum up to 200 bar
- Media : Air
- Adjustment resolution: 0,1 mbar
- Material : Body: SS & aluminum ~ Ram/adapters: SS ~ Seals: Buna-N
- Connections: 1/4NPT F, 1/4BSP F, or M20X1.5 F
- Dimensions: Base : 540×270 ~ Height ×178 (mm) 6,5 kg
- User-friendly, robust design and reliable performance
IO-8AOV Analog Voltage Output Module
- 8 voltage outputs
- Modbus RTU compatible
- Voltage: 0 - 10 Vdc
- Offset: 2 Vdc
- Insulation: 1500 Vrms
- Up to 128 modules on the RS485 network
- Indication LEDs
- Rai-din fixing
- Module configuration software
- User Manual
ADT-925 - Hydraulic Pressure Test Pump 400 bar
- Pressure range : 85% of vacuum up to 400 bar
- Media : Oil and Water
- Material : Body: SS & aluminum ~ Ram/adapters: SS ~ Seals: Buna-N
- Connections: 1/4NPT F, 1/4BSP F, or M20X1.5 F
- Dimensions: Base : 240×140 ~ Height ×120 (mm) 1,7kg
- User-friendly, robust design and reliable performance
IO-DAIO Analog & Digital Combination Module
- 2 inputs & 1 analog output
- 4 digital inputs & 2 digital outputs
- 2 RTD inputs
- Modbus RTU compatible
- Up to 128 modules on the RS485 network
- Indication LEDs
- Rai-din fixing
- Module configuration software
- User Manual
ADT-927 - Hydraulic Pressure Test Pump 700 bar
- Pressure range : 85% of vacuum up to 700 bar
- Media : Oil and Water
- Material : Body: SS & aluminum ~ Ram/adapters: SS ~ Seals: Buna-N
- Connections: 1/4NPT F, 1/4BSP F, or M20X1.5 F
- Dimensions: Base : 290×198 ~ Height ×135 (mm) 3,2kg
- User-friendly, robust design and reliable performance
ADT-936 Hydraulic Pressure Test Pump 1000 bar
- Pressure range : 85% of vacuum up to 1000 bar
- Media : Oil
- Material : Body: SS & aluminum ~ Ram/adapters: SS ~ Seals: Buna-N
- Connections: 1/4NPT F, 1/4BSP F, or M20X1.5 F
- Dimensions: Base : 520×360 ~ Height ×230 (mm) 16 kg
- User-friendly, robust design and reliable performance
IO-16DO Module 16 Digital Outputs
- 16 digital outputs
- Modbus RTU compatible
- Insulation: 1500 Vrms
- Indication LEDs for each channel
- Power supply: 12 V - 24 Vdc
- Up to 128 modules on the RS485 network
- Indication LEDs
- Rai-din fixing
- Module configuration software
- User Manual
PMP2 Pneumatic Test Pump -0.9 to 2 bar
- Pressure range: -0.9 to 2 bar
- Media: Air
- Resolution: 0.05 mbar
- Connections Standard instruments: 3/8 BSP F
- Connections Instruments test: 1/4 BSP F
- Nylon hose 1 meter with suitable connector
- Ergonomics & Ease of use
- Robust Design & Stable Performance
- No specific maintenance to be expected
Pneumatic Test Pump -0.95 à 6 bar
- Pressure range: 95% of vacuum at 6 bar
- Media: Air
- Resolution: 0.1 mbar
- Material: Body: Stainless steel & aluminum ~ Fittings: Stainless steel ~ Gaskets: Buna-N
- Instrument connections: 1 / 4NPT F, 1 / 4BSP F, or M20X1.5 F
- Dimensions: Base: 250 × 135 ~ Height × 140 (mm) 2 kg
- Ease of use, robust design and reliable performance
PI-PH6.0 PH Meter
- Measure range: pH: 0-14 pH, ±0.02pH;
- ORP: -1000 ~1000mV, ±1mV
- Input Resistance: ≥10~12Ω
- Temperature compensation : Manual/ Auto temperature compensation
- Signal output : 4-20mA, maximum loop 750Ω, 0.2%FS
- Communication : RS485 Modbus-RTU
- Relay output : 250V, 3A
- Power supply: 220V±10%，50Hz/60Hz
PMP10 Pneumatic Test Pump -0.9 to 10 bar
- Pressure range: -0.9 to 10 bar
- Media: Air
- Resolution: 1 mbar
- Connections Standard instruments: 3/8 BSP F
- Connections Instruments test: 1/4 BSP F
- Nylon hose 1 meter with suitable connector
- Ergonomics & Ease of use
- Robust Design & Stable Performance
- No specific maintenance to be expected
PMP25 Pneumatic Test Pump -0.9 to 25 bar
- Pressure range: -0.9 to 25 bar
- Media: Air
- Resolution: 1 mbar
- Connections Standard instruments: 3/8 BSP F
- Connections Instruments test: 1/4 BSP F
- Nylon hose 1 meter with suitable connector
- Ergonomics & Ease of use
- Robust Design & Stable Performance
- No specific maintenance to be expected
PMP35 Pneumatic Test Pump -0.9 to 35 bar
- Pressure range: -0.9 to 35 bar
- Media: Air
- Resolution: 1 mbar
- Connections Standard instruments: 3/8 BSP F
- Connections Instruments test: 1/4 BSP F
- Nylon hose 1 meter with suitable connector
- Ergonomics & Ease of use
- Robust Design & Stable Performance
- No specific maintenance to be expected
copy of PMP35 Pneumatic Test Pump -0.9 to 35 bar
- Pressure range: -0.9 to 40 bar
- Media: Air
- Resolution: 1 mbar
- Connections Standard instruments: 3/8 BSP F
- Connections Instruments test: 1/4 BSP F
- Nylon hose 1 meter with suitable connector
- Ergonomics & Ease of use
- Robust Design & Stable Performance
- No specific maintenance to be expected
PMH200 Hydraulic Pressure Test Pump 200 bar
- Pressure range: 0 to 200 bar
- Media: Hydraulic oil / Water (optional)
- Oil tank: 100 ml
- Very fine adjustment valve for optimum resolution
- Connections Standard instruments: 1/4 G F
- Connections Test Instruments: 1/4 G F
- Hydraulic hose 1 meter with suitable connection
- Ergonomics & Ease of use
- Robust Design & Stable Performance
English
Français
