• * Galvanic isolation
• * No external power supply for configuration
• * Write or read the configuration off-line by just connecting a PC
• * Fault signal on sensor break or short circuit
• * 2 wire technology, 4 to 20mA analogue output
• * High accuracy in total ambient temperature range
• * Customer specific measurement range setting or expanded SETUP

• 6 RTD inputs (2 & 3 files)
• PT100, Ni120, PT1000; Ni1000 -Din ...
• Modbus RTU compatible
• Insulation: 1500 Vrms
• Power supply: 12 V - 24 Vdc
• Up to 128 modules on the RS485 network
• Indication LEDs
• Rai-din fixing
• Module configuration software
• User Manual

• High measurement accuracy: Accuracy: 0.5%
• Wide measuring range: DN15 to DN6000
• Energy meter: Measurement of thermal and cooling energy
• Wide temperature range: Fluid from -30 ° C to 160 ° C
• Multiple communication interface as standard:
• Outputs: RS-485 Modbus RTU ~ 1x 4-20 mA ~ 1x Pulse ~ 1x Relay
• Inputs: 3x 4-20mA (acquisition of temperature, pressure, level signals, etc.)
• Multiple materials and pressures available:
• Carbon steel, 304 stainless steel, 316 stainless steel, 1.0 Mpa, 1.6 Mpa, 2.5 Mpa
• IP68 protection - Fully waterproof: Does not fear splashing water or humid environments
• Waterproof keyboard: 4 keys - settings and multiple functions

• * Dimensions:   44mm×22.5mm(Φ×H)
• * Output:   4 to 20mA
• * Supply voltage:   11.5 to 35VDC (non-Ex-Area) 11.5 to 30VDC (Ex-Area)
• * Input:   RTD, TC, Ohm, mV
• * Operation:   HART-protocol
• * Galvanic isolation(In/Out):  2KVAC
• * Installation:  sensor head Form B

• 8 isolated Thermocouples inputs
• Modbus RTU compatible
• Type: J, K, E, T, N, B, S, R, mV, C, D & G
• Insulation: 1500 Vrms (350 V between channels)
• Power supply: 12 V - 24 Vdc
• Up to 128 modules on the RS485 network
• Indication LEDs
• Rai-din fixing
• Module configuration software
• User Manual

• Thermal & cooling energy Advanced technology & electronics
• Easy to install & use
• Accuracy, stability & longevity
• Communications & remote reading
• Compact & robust design
• Vertical or horizontal mounting
• Multifunctional display/ 8 digit LCD screen
• Long life battery or power supply
• Suitable for lower water quality

• 8 Thermocouples inputs
• Modbus RTU compatible
• Type: J, K, E, T, N, B, S, R, mV, C, D & G
• Insulation: 1500 Vrms
• Power supply: 12 V - 24 Vdc
• Up to 128 modules on the RS485 network
• Indication LEDs
• Rai-din fixing
• Module configuration software
• User Manual

• 4 ~ 20mA 2 inputs (fully isolated) HART
• Power supply: 7-30Vdc
• IP67
• Transmitter material: PVDF
• Internal temperature compensation
• Beam angle: 7
• Unaffected by liquid temperature or viscosity
• Maximum measurement: 12m

• 8 Current inputs
• Modbus RTU compatible
• Current: 0 - 20 mA
• Offset: 4 mA
• Insulation: 1500 Vrms
• Up to 128 modules on the RS485 network
• Indication LEDs
• Rai-din fixing
• Module configuration software
• User Manual

• Measuring range: Liquid (0.25 ～ 4) m
• Process connection: G1½A
• PTFE 、 PU / PC
• Process temperature: (-40 ～ 70) ° C
• Process pressure: (-0.02 ～ 0.1) MPa
• Output signal: (4 ～ 20) mA / HART
• Power: dual-wire (DC24V) four-wire (DC24V / AC220V)

For all clear, non biphasic liquids and all types of pipes from DN20 to DN 1200 : 

• Measurement accuracy 1% F.S
• Communications : 4~20 mA & RS485 Modbus
• Programmable data logger 16 GB SD card
• Battery 16 hours autonomy
• Non-invasive transducers Stainless steel IP68
• Mounting rails for optimal measurement
• Energy metering included
• 2x TT02 IP68 transducers
• -40 °C ~ 80 °C (130°C optional)
• Suitable for pipes DN 20 mm to DN 1200 mm
• Mounting rails with strip and clamps
• Standard cable length: 5 meters
• 2x non-intrusive PT100 IP68 temperature sensors
• Measurement of thermal & cooling energy

• 8 current differential inputs
• Modbus RTU compatible
• Current: 0 - 20 mA
• Offset: 4 mA
• Insulation: 1000 Vrms (350 V between channels)
• Up to 128 modules on the RS485 network
• Indication LEDs
• Rai-din fixing
• Module configuration software
• User Manual